{"id":798,"date":"2019-02-08T08:24:49","date_gmt":"2019-02-08T08:24:49","guid":{"rendered":"http:\/\/foxmet.com\/?page_id=798"},"modified":"2020-01-02T10:28:18","modified_gmt":"2020-01-02T10:28:18","slug":"technical-assistance","status":"publish","type":"page","link":"https:\/\/foxmet.com\/index.php\/diamonds-grits-granules\/technical-assistance\/","title":{"rendered":"Technical Assistance"},"content":{"rendered":"\t\t
\n\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t
\n

TECHNICAL ASSISTANCE<\/h2>\n
 <\/div>\n<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Being at the same time on the field, in the workshop or in the laboratory to solve technical problems and\/or to develop new product lines requests expensive equipments, a bunch of time and a maximum of availability from a technical person !
At FOXMET S.A., we understand your problems and we try our outmost to help you to improve the cutting performances of your sawing tools.<\/p>

Our technical assistance schema involves:<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tAnalysis of stones samples\t\t\t\t\t<\/div>\n\t\t\t\t\t
SEM Pictures<\/th>\u00a0<\/td>\"\"

Arcika Roja\/Verde<\/td>		\"\"

Bluestone<\/td><\/tr><\/tbody><\/table>
Chemical Composition<\/th>Silicon (Si)<\/td>67 %<\/td>71 %<\/td><\/tr>
\u00a0<\/td>Aluminium (Al)<\/td>14 %<\/td>13 %<\/td><\/tr>
\u00a0<\/td>Iron (Fe)<\/td>8 %<\/td>9 %<\/td><\/tr>
\u00a0<\/td>Potassium (K)<\/td>8 %<\/td>6 %<\/td><\/tr>
\u00a0<\/td>Titanium (Ti)<\/td>–<\/td>1 %<\/td><\/tr>
\u00a0<\/td>Calcium (Ca)<\/td>3 %<\/td>–<\/td><\/tr><\/tbody><\/table>
Hardness<\/th>\u00a0<\/td>–<\/td>46 Shore D<\/td><\/tr><\/tbody><\/table>
Structure<\/th>\u00a0<\/td>Not homogenous
Contains big cristals<\/td>		Not homogenous
Contains few big cristals<\/td><\/tr><\/tbody><\/table>
Abrasivity<\/th>\u00a0<\/td>High<\/td>Medium to High<\/td><\/tr><\/tbody><\/table><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tANALYSIS OF THE STEEL BLADES\t\t\t\t\t<\/div>\n\t\t\t\t\t
BD :<\/th>Bore Diameter<\/td>60 mm<\/td><\/tr>
D :<\/th>Diameter<\/td>380 mm<\/td><\/tr>
BT :<\/th>Blade Thickness<\/td>2.5 mm<\/td><\/tr>
SD :<\/th>Slot Depth<\/td>14 mm<\/td><\/tr>
SW :<\/th>Slot Width<\/td>3 mm<\/td><\/tr>
Steel Hardness<\/th>\u00a0<\/td>34 HRC<\/td><\/tr><\/tbody><\/table>

\"\"<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tANALYSIS OF THE SEGMENTS\t\t\t\t\t<\/div>\n\t\t\t\t\t
Shapes<\/th><\/tr><\/tbody><\/table>
\"\"

Standard<\/td>		\"\"

Sandwich<\/td>		\"\"

Conical<\/td><\/tr><\/tbody><\/table>
\"\"

Pagode<\/td>		\"\"

Mammouth<\/td><\/tr><\/tbody><\/table>
Dimensions<\/th><\/tr>
T. :<\/th>Thickness<\/td>\"\"<\/td><\/tr>
S.T.H. :<\/th>Segment Total Height<\/td><\/tr>
C.H. :<\/th>Concretion Height<\/td><\/tr>
S.C. :<\/th>Side Clearance<\/td><\/tr><\/tbody><\/table>
Metallography<\/th>\u00a0<\/td>\u00a0<\/td><\/tr>
\u00a0<\/td>\"\"<\/td>\"\"<\/td><\/tr>
\u00a0<\/td>\"\"<\/td>\"\"<\/td><\/tr><\/tbody><\/table>
\u00a0<\/td>\u00a0<\/td>Worn segments<\/th>New segments<\/th><\/tr>
Number of segments<\/th>\u00a0<\/td>21<\/td>21<\/td><\/tr>
\u00a0<\/td><\/tr>
Analysis<\/th>Iron (Fe)<\/td>36 %<\/td>36 %<\/td><\/tr>
\u00a0<\/td>Cobalt (Co)<\/td>54 %<\/td>54 %<\/td><\/tr>
\u00a0<\/td>Copper-Silver-Titanium (CuAgTi)<\/td>10 %<\/td>10 %<\/td><\/tr><\/tbody><\/table>
Porosity<\/th>\u00a0<\/td>\u00a0<\/td><\/tr>
\u00a0<\/td>\"\"

Opened<\/td>		\"\"

Closed<\/td><\/tr><\/tbody><\/table>
Fractography<\/th>\u00a0<\/td>\u00a0<\/td><\/tr>
\u00a0<\/td>\"\"

Fractures around diamonds<\/td>		\"\"

Fractures foot – matrix<\/td>		\"\"

Diamond clusters<\/td><\/tr><\/tbody><\/table>
Welding<\/th><\/tr><\/tbody><\/table>

The segments can be welded onto steel blades by conventional method (i.e. brazing alloys in strips, in wire, in paste, etc.) or by laser. A defficient welding can be at the origin of cutting defaults such as deviation cuts, loosed segments, etc. Therefore, it is important to verify the welding.<\/p>

The welding analysis includes the control of :<\/p>